Amped Wireless Range Extender User Manual

Posted : admin On 12/26/2021

Amped Wireless REC10 Wifi Range Extender is the new device I’ve just got and you can read our review here.

  1. Amped Wireless Range Extender Manual
  • “AmpedWireless” This SSID for the Extended Network may be changed by adjusting the name in the field for the Extended Wireless Network ID. This ID will be used by wireless users connecting to the Smart Repeater to identify the Smart Repeater’s Extended Network.
  • Amped Wireless is the name that provides quality products in Wireless routers, Wireless Range Extender, Access Point, Ally Wi-Fi System, Adapters, HD Wi-Fi Camera System, Antennas and Boosters, ProSeries Switches, Bluetooth Audio, Powerline, A/V Net Connect, Smart Home Solutions, etc. Amped wireless develop one of the best quality devices, with long-range wireless products with proper.
  • The Amped wireless High power AC1200 Wi-Fi range extender expands the range of any standard 802.11a/B/G/n/AC Wi-Fi network by repeating the signal (2.4GHz and 5GHz) from a Wi-Fi router and redistributing it in a new 'extended' location at ultra-fast speeds.
  • At Amped Wireless we strive to provide you with the. User’s Manual, Installation Video. REC10 USER’S GUIDE 4 LED Indicators (From Top to Bottom). Connect your PC or Tablet to the Range Extender’s Wi-Fi network: AmpedREC10. REC10 USER’S GUIDE 8 Open your Web Browser to Access the Setup Wizard.

Amped Wireless SR300 High Power Wireless-N Range Extender Support Page metadescription. High Power Wireless-300N Range Extender SR300. To view the User's Guide for your product check out the Documentation section. If you are having problems finding what you need, contact us.

I was very worried before setting up the REC10 because I heard some complaints that the device is not compatible with some routers. Fortunately, it works great on my聽Belkin N600 Wireless Dual-Band N+ Router and Optimum’s network.

Here are the steps to set up the聽REC10 Wifi Range Extender on an existing network. Those are easy steps but you could be confused if you don’t have the guide. This is the guide for Windows 8, but you absolutely can do the same on Mac OS X or older Windows versions. Let’s check out the step-by-step tutorial.

Step 1: Connect to REC10

Once plugging the REC10 to power outlet, it will be automatically turned on and you can easily find a new Wi-Fi network named Amped_REC10 in the list. Click on Connect.

Then, you will see a prompt asking do you want to set up the router. Select “No, just connect“.

Step 2: Access Dashboard

Open the newest version of your browser like Chrome, Safari or Internet Explorer (avoid using Firefox) and enter the following address:

http://setup.ampedwireless.com

If there is any problem, try this address:

http://192.168.1.240

Extender

If you still have problem connecting to the address, you can use an Ethernet cable to connect your PC directly to the Wi-Fi range extender and then try again.

Here is the Dashboard you will see.

Step 3: Set up Extended Network

Click on Scan to start finding all available network to extend. You will see the list like below:

Select the network that you want to extend. Make sure that the signal strength should be greater than 70%. If it is lower, you should find another location for the REC10 which is between your wireless router and dead zone.

Enter the security key for your existing network and click on Next.

Enter the network ID and security key for your extended network. You can click on Clone Settings to use the same security key and a similar Network ID.

After that, you will need to wait about 2 minutes. The REC10 will be rebooted and you will be disconnected from the network.

Step 4: Connect to the new Extended Network

Now, you will need to reconnect to the new extend network. Then click on the checkbox “Confirm that you are now connected to your Extended Network” to finish.

Amped Wireless Range Extender Manual

The setup process for the Range Extender is now completed. You can start using the new and stronger network. Just make sure to save the Setup Summary in the last screen, you might need it to access Dashboard later.