X Rite I1 Display Pro User Manual

Posted : admin On 12/26/2021
  1. I1 Display Pro Software Download
  2. X-rite I1 Display Pro Software
  3. X Rite I1 Display Pro User Manual 2018
  4. I1 Display Pro Manual
X Rite I1 Display Pro User Manual
Corporate: +1 206 420 7514 Tech Support: +1 206 457 8949 www.spectracal.com

I1 Display Pro Software Download

i1Pro Enhanced
1. Download and install the CalMAN Device Driver Kit

Professional Display Calibration for the Most Demanding Color Perfectionists The X-Rite i1Display Pro is the ultimate choice for discerning photographers, filmmakers, designers and imaging professionals looking for the highest level of on-screen color accuracy for.

A.Browse to www.spectracal.com. From the navigation bar at the top of the page,
  1. X-Rite i1Display Pro. X-Rite i1Display Pro (which I have already reviewed, so find all the details HERE) consists of two main elements. I1Display Pro: the probe; iProfiler: the software; In essence, and as always trivializing, the process of calibration and profiling works like this: after setting (calibrating) the monitor correctly, the software (in this case iProfiler) displays on the.
  2. X-rite i1Display Pro Pdf User Manuals. View online or download X-rite i1Display Pro Quick Start Manual.
B.From the Downloads page, under 'Other Resources,' find Device Driver Kit, and

X-rite I1 Display Pro Software

press the Download Now button. (You may need to answer security prompts from
your web browser to verify that you wish to download a file.)
C.Choose Run from the download prompt or double-click on the Device Drivers msi
2. Plug the i1Pro into a USB port in your system and install the driver.
When you plug in your i1Pro, Windows will pop up a Found New Hardware
Wizard. To the prompt 'What do you want the Wizard to do,' select the
option, 'Install from a list or specific location.' Use theBrowse button to locate
the directory where you installed the Device Driver Kit, then select the i1Pro
directory. The Typical location will be “C:/Program
Files/Spectracal/Drivers/i1Pro or when installed on a Windows 64 bit computer
the location will be C:/Program Files(x86)/Spectracal/Drivers/i1Pro”
Windows7 does not prompt for driver installation when a device is first
attached. In order to install the drivers, go to Start/Control Panel, choose
System and then choose Device Manager on the left hand side of the System
In the CalMAN V4 software, on the right side bar, select Settings and then
Meter Settings. If this is the first time using the i1Pro on this PC you will need
to select the search button, then click search on the pop up box. Once the pop
up box is finished searching you will be able to click on the meter drop down
box, and you will see the i1Pro in the list. You will also want to select the
proper display type to match the display you are calibrating.
Advertising

17544 Midvale Ave. N. Shoreline, WA 98133 USA

X Rite I1 Display Pro User Manual 2018

Corporate: +1 206 420 7514 Tech Support: +1 206 457 8949

X-Rite i1Pro Enhanced

Quick Start Guide

Meter and Base Plate
Each i1Pro is uniquely paired with its own base plate.
They should remain together. At the tip of the base
plate is a white dot of reference material conforming to
a standard. Your i1 was calibrated at the factory to this
white dot, and should you ever need to run the i1Pro
diagnostics, it will expect this same dot.

Ambient Filter
The small black box contains the ambient filter. Note
that there are actually two pieces inside the black box:
the filter and a cap. The filter is inside the cap. To put
it on your i1Pro, snap the cap on the meter head, rotate
slightly, and pull directly off. The filter will remain on
the meter. Use the filter when reading directly from a
projector. You can use the cap to perform a dark
calibration.

USB Cable
The i1Pro draws a substantial amount of power, which some USB ports, hubs and
extension cables will not supply. Before trying to use a hub or an extension cord,
first plug your i1Pro directly into your computer.

Suspension Strap and Tripod Holder
The suspension strap is for hanging an i1Pro on a display.
For most applications, we recommend the tripod holder
instead. Slide the two prongs on the tripod holder into the
two holes on the bottom of the i1Pro, and wrap the Velcro
strap around the i1to secure it.

Empty Spaces in Carrying Case
You will note that the carrying case has empty spaces. In
addition to its role as a reference instrument for video display calibration, the i1Pro is
also sold into many other industries. Some of these other applications require other
accessories, and rather than design a different carrying case for each industry, X-rite
provides one case to serve all.

Advertising
Popular Brands

I1 Display Pro Manual

Popular manuals